Product information：

Instructions for use:
Example: For a 12mm belt maker, prepare a 24mm width diagonal cloth strip (45 degrees is the most appropriate), which needs to be longer than the expected production length.
When in use, cut the front end of the cloth strip into a triangle shape for easy insertion. Enter from the larger end of the tape maker and exit from the smaller end.
After pulling out the cloth strips, do some sorting and iron them with an iron.
Same as above for other models
tips
6mm is the width of the finished edging strip. Prepare a diagonal cut cloth strip with a width of 12mm, and the edging of the work is 3mm (fold the edging strip in half)
12mm is the width of the finished edging strip. Prepare a 24mm width diagonal cut cloth strip, and the edging of the work is 6mm (fold the edging strip in half)
18mm is the width of the finished edging strip. Prepare a 36mm width diagonal cut cloth strip, and the edging of the work is 9mm (fold the edging strip in half)
25mm is the width of the finished edging strip. Prepare a 46mm width of diagonal cut cloth strips, and the edging of the work is 11.5mm (folding the edging strips in half)

Packing list
Sewing tools x1